Software title information and feedback tested by customers
Forum rules
Before posting, make sure you have tried all the EXTDSP settings available found in the 'Options' in the Menu System! Also be sure to check JIRA if your game is currently not working and is already being worked on.
-
vj88
- Member
- Posts: 34
- Joined: December 20th, 2018, 3:43 am
- I am a: Gamer
- PlayStation Model: DTL-H3000
- Steam: vj88
- Location: Italy
Post
by vj88 » December 29th, 2018, 9:04 pm
Hi! It's me, vj88... again! Sorry for all these posts but PSIO has just arrived and I am testing various games.
So Tai Fu NTSC U :
K1V3 : black screen and freeze after selecting new game (immediately after loading screen)
K1V1: black screen and freeze after dreamworks logo
K1V2: black screen and freeze after dreamworks logo
Could it be my .bin but checksum, etc seem correct.
Ps working well on emulator
Playstation: Net Yaroze DTL-H3000
(with AK4309AVM mod and DTL-H1100 external PSU)
Menu System: 2.6 build 5
ARM Firmware: 2.6.1
FPGA Firmware: STY3 02/12/2018
PSX BIOS: V2.2 NTSC-UC
-
NRGDEAD
- /// CYBDYN SYSTEMS ELITE ///
- Posts: 880
- Joined: September 22nd, 2017, 3:10 am
- I am a: Noob
- PlayStation Model: SCPH-1002
Post
by NRGDEAD » December 29th, 2018, 9:40 pm
Define "seem correct". ;-)
Is it Redump-compatible? If not, did you try to re-rip it? Re-rip it using a different drive and comparing MD5 hashes? Did you try to convert a Redump-compatible image to single bin?
-
krisk77
- /// CYBDYN SYSTEMS ELITE ///
- Posts: 461
- Joined: December 9th, 2015, 1:37 pm
Post
by krisk77 » December 30th, 2018, 12:55 am
vj88 wrote: ↑December 29th, 2018, 9:04 pm
Hi! It's me, vj88... again! Sorry for all these posts but PSIO has just arrived and I am testing various games.
So Tai Fu NTSC U :
K1V3 : black screen and freeze after selecting new game (immediately after loading screen)
K1V1: black screen and freeze after dreamworks logo
K1V2: black screen and freeze after dreamworks logo
Could it be my .bin but checksum, etc seem correct.
Ps working well on emulator
Can confirm i have this too, as I was meaning to report it before xmas. I have tested this game with all KV modes, 3 seperate SD cards and two different consoles (PU-8 and PU-20) JP/NTSC using the NTSC/U redump image and CU2 files.
Report here
https://ps-io.com/problem/NTSC JP 5000 PU-8/PSIO Switchboard
NTSC JP 7000 PU-20/Mayumi 4 chip + PSIO Switchboard
PAL 7502 PU-22/Mayumi 4 Chip + PSIO Switchboard
-
vj88
- Member
- Posts: 34
- Joined: December 20th, 2018, 3:43 am
- I am a: Gamer
- PlayStation Model: DTL-H3000
- Steam: vj88
- Location: Italy
Post
by vj88 » December 30th, 2018, 3:01 am
NRGDEAD wrote: ↑December 29th, 2018, 9:40 pm
Did you try to convert a Redump-compatible image to single bin?
Yes, I used PSIO Systems Console to create a single .bin + .cu2 file
krisk77 wrote: ↑December 30th, 2018, 12:55 am
Can confirm i have this too, as I was meaning to report it before xmas. I have tested this game with all KV modes, 3 seperate SD cards and two different consoles (PU-8 and PU-20) JP/NTSC using the NTSC/U redump image and CU2 files.
Report here
https://ps-io.com/problem/
Good to know, I will report
Playstation: Net Yaroze DTL-H3000
(with AK4309AVM mod and DTL-H1100 external PSU)
Menu System: 2.6 build 5
ARM Firmware: 2.6.1
FPGA Firmware: STY3 02/12/2018
PSX BIOS: V2.2 NTSC-UC
-
Yuri
- Cybdyn Systems - Admin
- Posts: 229
- Joined: January 13th, 2012, 1:56 am
- I am a: Embedded Developer
- Location: Russia
Post
by Yuri » January 10th, 2019, 4:24 am
I tested NTSC version, under USB it's working (even without cu2 file),
I'll do futher tests under SD)
-
vj88
- Member
- Posts: 34
- Joined: December 20th, 2018, 3:43 am
- I am a: Gamer
- PlayStation Model: DTL-H3000
- Steam: vj88
- Location: Italy
Post
by vj88 » January 11th, 2019, 3:27 am
I'm forced to play through SD unfortunately. I just could not get past the loading screen in none of my tests.
Playstation: Net Yaroze DTL-H3000
(with AK4309AVM mod and DTL-H1100 external PSU)
Menu System: 2.6 build 5
ARM Firmware: 2.6.1
FPGA Firmware: STY3 02/12/2018
PSX BIOS: V2.2 NTSC-UC
-
portnoi88
- Member
- Posts: 22
- Joined: May 1st, 2018, 4:53 am
Post
by portnoi88 » January 28th, 2019, 6:05 am
The PAL version works great.
-
krisk77
- /// CYBDYN SYSTEMS ELITE ///
- Posts: 461
- Joined: December 9th, 2015, 1:37 pm
Post
by krisk77 » September 3rd, 2019, 8:36 am
US/NTSC redump image tested again on Menu V2.6.6 (all EXTDSP + Midboot). Still crashes on the loading screen when starting a "New Game"
NTSC JP 5000 PU-8/PSIO Switchboard
NTSC JP 7000 PU-20/Mayumi 4 chip + PSIO Switchboard
PAL 7502 PU-22/Mayumi 4 Chip + PSIO Switchboard
-
Matt
- Cybdyn Systems - Admin
- Posts: 2929
- Joined: December 31st, 2012, 5:37 pm
- I am a: Systems Designer
- PlayStation Model: H2000/5502
- Location: Australia
-
Contact:
Post
by Matt » September 3rd, 2019, 7:57 pm
Fixed in ARM V2.6.3 (via Menu System V2.6.7). You can download the update now.
-
krisk77
- /// CYBDYN SYSTEMS ELITE ///
- Posts: 461
- Joined: December 9th, 2015, 1:37 pm
Post
by krisk77 » September 3rd, 2019, 9:03 pm
Matt wrote: ↑September 3rd, 2019, 7:57 pm
Fixed in ARM V2.6.3 (via Menu System V2.6.7). You can download the update now.
Yeah, thanks. Just tried it now:)
NTSC JP 5000 PU-8/PSIO Switchboard
NTSC JP 7000 PU-20/Mayumi 4 chip + PSIO Switchboard
PAL 7502 PU-22/Mayumi 4 Chip + PSIO Switchboard
Users browsing this forum: No registered users and 3 guests
