Official PSIO News and Development Thread

Official Development, Research, Bug Fixes and Progress directly from Cybdyn Systems
User avatar
Matt
Cybdyn Systems
Cybdyn Systems
Posts: 937
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Official PSIO News and Development Thread

Post by Matt » May 11th, 2017, 7:04 pm

Fixed.

zeruel85
Active around PSXDEV
Active around PSXDEV
Posts: 46
Joined: November 25th, 2015, 10:03 pm

Re: Official PSIO News and Development Thread

Post by zeruel85 » May 11th, 2017, 7:23 pm

Matt wrote:
May 11th, 2017, 7:04 pm
Fixed.
Menu System also has some problem. Please can you check it? Thank you. :)

EDIT:
Also FPGA and ARM firmware have problems. The archives are damaged, I think there's a problem with the server.

Relikk
Curious about PSXDEV
Curious about PSXDEV
Posts: 28
Joined: March 6th, 2013, 12:43 am
I am a: Sound Engineer
Location: Ireland

Re: Official PSIO News and Development Thread

Post by Relikk » May 11th, 2017, 7:39 pm

Can confirm. FPGA was OK for me but, ARM archive was corrupt.

User avatar
Matt
Cybdyn Systems
Cybdyn Systems
Posts: 937
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Official PSIO News and Development Thread

Post by Matt » May 11th, 2017, 7:42 pm

I had to restart the server because it went down, so try downloading those again. It's been doing that a lot more now recently since it's even lower on resources. I'll swap providers soon because the hosting is expensive and for the amount I pay each month I'm not getting a lot of power out of it. At the moment it's only got 5 GB of RAM, a 10 GB HDD and a Dual-Core at 2.44 GHz. Rubbish.

zeruel85
Active around PSXDEV
Active around PSXDEV
Posts: 46
Joined: November 25th, 2015, 10:03 pm

Re: Official PSIO News and Development Thread

Post by zeruel85 » May 11th, 2017, 8:00 pm

Matt wrote:
May 11th, 2017, 7:42 pm
I had to restart the server because it went down, so try downloading those again. It's been doing that a lot more now recently since it's even lower on resources. I'll swap providers soon because the hosting is expensive and for the amount I pay each month I'm not getting a lot of power out of it. At the moment it's only got 5 GB of RAM, a 10 GB HDD and a Dual-Core at 2.44 GHz. Rubbish.
It' not working for me.

User avatar
Matt
Cybdyn Systems
Cybdyn Systems
Posts: 937
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Official PSIO News and Development Thread

Post by Matt » May 11th, 2017, 8:11 pm

Clear your cache and try again please. Should be fine.

zeruel85
Active around PSXDEV
Active around PSXDEV
Posts: 46
Joined: November 25th, 2015, 10:03 pm

Re: Official PSIO News and Development Thread

Post by zeruel85 » May 11th, 2017, 8:33 pm

Matt wrote:
May 11th, 2017, 8:11 pm
Clear your cache and try again please. Should be fine.
Ok, done and also updated correctly. Thanks for your support. :)
Menu System is v2.0.1 by the way, not v2.0.0 like mentioned in the Downloads section. Not a big deal though, just wanted to point that out. :D

User avatar
Matt
Cybdyn Systems
Cybdyn Systems
Posts: 937
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Official PSIO News and Development Thread

Post by Matt » May 11th, 2017, 8:38 pm

That's odd. I specifically compiled it for V2.0.0. Looks like my automatic version incrementer doesn't like when I use a value of -1. Probably because I was using an unsigned short. I'll have to fix that in my code so it doesn't happen in the future. I'll update the logs so it says V2.0.1 though. Thanks.

User avatar
Matt
Cybdyn Systems
Cybdyn Systems
Posts: 937
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Official PSIO News and Development Thread

Post by Matt » May 12th, 2017, 12:48 pm

New ARM Firmware:

Code: Select all

______________________________________________________________
   PSIO ARM Firmware - Version 2.4, Build 3 (12/MAY/2017)
  Copyright 2010-2017 Cybdyn Systems. All Rights Reserved.

                      http://ps-io.com/
--------------------------------------------------------------

  2.4.3
	- Fixed the INT clear routines (fixes "Parasite Eve 2" from V2.4.2).
	- Timing re-adjusted (fixes "Gex" and "Driver 2" from V2.4.2).
______________________________________________________________

New Menu System available:

Code: Select all

______________________________________________________________
   PSIO Menu System - Version 2.0, Build 5 (12/MAY/2017)
  Copyright 2010-2017 Cybdyn Systems. All Rights Reserved.

                      http://ps-io.com/
--------------------------------------------------------------

  ======================================
  |~[Recent Changes from 2.0.1->2.0.5]~|
  ======================================
  - [Update] Changed the loading routines for ARM V2.4.3.
______________________________________________________________

Blade732
What is PSXDEV?
What is PSXDEV?
Posts: 1
Joined: May 12th, 2017, 2:48 pm

Re: Official PSIO News and Development Thread

Post by Blade732 » May 12th, 2017, 2:55 pm

Hi Matt,

I'm having some trouble with the latest firmware and system menu releases. When I get thru the console's two boot screens (see "PSIO" at the bottom), the console stops outputting all video or audio. As this happens, the PSIO's side light blinks yellow twice -- then nothing. The unit was working properly with the last build I had installed (the one from mid-April).

I have also tried downloading and extracting the new files to my SD card 3 times w/ the same result. Any ideas?

User avatar
Matt
Cybdyn Systems
Cybdyn Systems
Posts: 937
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Official PSIO News and Development Thread

Post by Matt » May 12th, 2017, 4:49 pm

Make sure you've updated the ARM to V2.4.3 and the Menu System to V2.0.5. We have multiple security checks in place which prevent the Menu System from booting on PSIO cartridges which have been either tampered with or are fake/non-genuine 'Cybdyn System' cartridges.

Try also holding [START + SELECT] on boot to reset your cartridge. If you're still having trouble, please email us directly so I can debug this further for you.

User avatar
fille1976
Active around PSXDEV
Active around PSXDEV
Posts: 54
Joined: November 15th, 2015, 9:19 pm

Re: Official PSIO News and Development Thread

Post by fille1976 » May 13th, 2017, 5:16 am

thx matt for the update.

User avatar
MeteK
Curious about PSXDEV
Curious about PSXDEV
Posts: 18
Joined: October 25th, 2016, 11:56 am

Re: Official PSIO News and Development Thread

Post by MeteK » May 13th, 2017, 2:52 pm

Hello !

I've updated also, and i've noticied big slowdown at console's boot (to have psio menu) and first loading of a game.

Also, where to post to signal incompatibility for a game ?

User avatar
Matt
Cybdyn Systems
Cybdyn Systems
Posts: 937
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Official PSIO News and Development Thread

Post by Matt » May 13th, 2017, 6:22 pm

The slowdown is normal. It's actually pausing at the end of each command which has improved compatibility.
You can report it here: http://ps-io.com/problem/

User avatar
zredgemz
Lives in the PSXDEV Server
Lives in the PSXDEV Server
Posts: 162
Joined: November 24th, 2015, 9:48 am
PlayStation Model: SCPH-5501

Re: Official PSIO News and Development Thread

Post by zredgemz » May 15th, 2017, 2:26 am

Sweet, gonna update and test games now.

backtomac
What is PSXDEV?
What is PSXDEV?
Posts: 1
Joined: May 15th, 2017, 6:21 am

Re: Official PSIO News and Development Thread

Post by backtomac » May 15th, 2017, 6:29 am

problem after updated all latest software.
I press start + select while start up to reset psio, setup the psio, then auto play some demo movie, company logo show up, then freeze in black screen. Then I try load the previous version menu system, It's start, but said detected a old version FPGA firmware, told me update it to DBF9 (the previous version)
I think the Version 2.0.5 Menu system crash my PSIO.

User avatar
Matt
Cybdyn Systems
Cybdyn Systems
Posts: 937
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Official PSIO News and Development Thread

Post by Matt » May 15th, 2017, 2:25 pm

backtomac wrote:
May 15th, 2017, 6:29 am
problem after updated all latest software.
I press start + select while start up to reset psio, setup the psio, then auto play some demo movie, company logo show up, then freeze in black screen. Then I try load the previous version menu system, It's start, but said detected a old version FPGA firmware, told me update it to DBF9 (the previous version)
I think the Version 2.0.5 Menu system crash my PSIO.
PM sent.

EDIT: New Menu System released (V2.0.25) fixes this issue.

User avatar
Matt
Cybdyn Systems
Cybdyn Systems
Posts: 937
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Official PSIO News and Development Thread

Post by Matt » May 17th, 2017, 12:02 am

Systems Manual updated:

Code: Select all

R2.7

Menu System updated:

Code: Select all

______________________________________________________________
   PSIO Menu System - Version 2.0, Build 25 (16/MAY/2017)
  Copyright 2010-2017 Cybdyn Systems. All Rights Reserved.

                      http://ps-io.com/
--------------------------------------------------------------

  ========================================
  |~[Recent Changes from 2.0.15->2.0.25]~|
  ========================================
  - [Bug Fix] Changed how the GPU video mode is setup (stops certain PlayStation models from crashing).
  - [Feature] Routines added for acquiring the PlayStation BIOS as a CRC32 hash.
  - [Feature] Firmware file checking added.
______________________________________________________________


User avatar
fille1976
Active around PSXDEV
Active around PSXDEV
Posts: 54
Joined: November 15th, 2015, 9:19 pm

Re: Official PSIO News and Development Thread

Post by fille1976 » May 17th, 2017, 7:22 am

thx matt for your hard work.

User avatar
MateriaMind
Lives in the PSXDEV Server
Lives in the PSXDEV Server
Posts: 226
Joined: February 26th, 2014, 10:04 pm
I am a: Nurse
PlayStation Model: SCPH-5501
Location: United States

Re: Official PSIO News and Development Thread

Post by MateriaMind » May 20th, 2017, 8:52 pm

The FF8 Disc 3 issue is fixed :dance
"What is a man?!? A miserable little pile of secrets!"

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest