ps io never shows up

[makinavaja]

Hi

After installing the switch board, I still can load my original games on my psx, but when I plug my ps-io cartridge nothing happens and the console jumps to the system menu like normally.
All soldering on the switch board has been tested. I also removed the metal shiled so I can test all soldering from the other side of the board.
All cut tracks has been tested with a multimether.
I've tested several SD cards with fat32, copying on the root, of course, the menu.sys file.
I try the USB mode, but the psio system console never detects it, while windows detects an storage device with corrupted file names.
The device was purchased more than one year ago, but until today I couldn't test it.

[makinavaja]

By the way, on USB mode, the console doesnt boot, it doesnt show the system menu.

[Matt]

Have you updated to the latest firmwares?

[makinavaja]

Hi

Have you updated to the latest firmwares?

Ps-io never worked on my psx so, I wasnt able to updatet the firmwares. So, my card uses the firmwares from 1 year ago.

[Matt]

Okay, it is either a bad Switch Board install, your parallel port is faulty or the SD Card isn't setup right.
I would send your mainboard in and so I can have a look at it for you.

[makinavaja]

Hi

Okay, it is either a bad Switch Board install, your parallel port is faulty or the SD Card isn't setup right.
I would send your mainboard in and so I can have a look at it for you.

Maybe I will do, but not now. Yesterday, doing more tests to see if there were anything wrong, maybe I broked something because now the original cd games doesnt works neither...

So, right now it doesn't have any sense sending you my board right now u_u;

Now I have to repair it or purchase another console