Stuck at PSIO screen after latest update

Feel free to go ahead and ask for Help and Support or check out what's already been answered from other customers
Post Reply
bahamutfan64
Just Joined
Just Joined
Posts: 7
Joined: May 11th, 2017, 5:17 pm

Stuck at PSIO screen after latest update

Post by bahamutfan64 » May 11th, 2017, 5:31 pm

I've tried updating to the latest ARM, FPGA, and menu firmware but I am now stuck at the PSIO logo screen.

As the the unit worked great with the prior firmware, could you please provide download links for those so I can try to rollback to them? Thanks!

User avatar
Matt
Cybdyn Systems - Admin
Cybdyn Systems - Admin
Posts: 1342
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Stuck at PSIO screen after latest update

Post by Matt » May 11th, 2017, 6:14 pm

Have you turned off your PSX once updated and tried again to load the Menu System up?

bahamutfan64
Just Joined
Just Joined
Posts: 7
Joined: May 11th, 2017, 5:17 pm

Re: Stuck at PSIO screen after latest update

Post by bahamutfan64 » May 12th, 2017, 1:29 am

Yes, even upon turning the PSX off and on again, I am still stuck at the PSIO logo screen (no loading bar displaying).

User avatar
Matt
Cybdyn Systems - Admin
Cybdyn Systems - Admin
Posts: 1342
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Stuck at PSIO screen after latest update

Post by Matt » May 12th, 2017, 11:26 am

Try holding [START + SELECT] when your turn your PSX on to reset your cartridge. Does that help?

bahamutfan64
Just Joined
Just Joined
Posts: 7
Joined: May 11th, 2017, 5:17 pm

Re: Stuck at PSIO screen after latest update

Post by bahamutfan64 » May 12th, 2017, 1:24 pm

I redownloaded all the firmware files (I noticed they were updated since yesterday), placed them on the SD card, and now the cartridge works again!

User avatar
Matt
Cybdyn Systems - Admin
Cybdyn Systems - Admin
Posts: 1342
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Stuck at PSIO screen after latest update

Post by Matt » May 12th, 2017, 1:54 pm

bahamutfan64 wrote:
May 12th, 2017, 1:24 pm
I redownloaded all the firmware files (I noticed they were updated since yesterday), placed them on the SD card, and now the cartridge works again!
Ah, okay. That's good to hear! I'd say your firmware was corrupted though and the new update has a higher version number so it forced a re-flash. We would have fixed it anyway since we do have a fail safe recovery mode, but that would have been a last resort :)

bahamutfan64
Just Joined
Just Joined
Posts: 7
Joined: May 11th, 2017, 5:17 pm

Re: Stuck at PSIO screen after latest update

Post by bahamutfan64 » May 12th, 2017, 2:19 pm

Thanks for the help! : )

aldolimongi
Just Joined
Just Joined
Posts: 2
Joined: May 14th, 2017, 1:56 pm

Re: Stuck at PSIO screen after latest update

Post by aldolimongi » May 14th, 2017, 2:04 pm

I just stuck on the logo menu after updating, i just tried re-downloading ARM, FPGA, and menu firmware, also tried reseting the cartridge but after the video ends, just got a black screen, hope you can help me

User avatar
Matt
Cybdyn Systems - Admin
Cybdyn Systems - Admin
Posts: 1342
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Stuck at PSIO screen after latest update

Post by Matt » May 14th, 2017, 8:48 pm

aldolimongi wrote:
May 14th, 2017, 2:04 pm
I just stuck on the logo menu after updating, i just tried re-downloading ARM, FPGA, and menu firmware, also tried reseting the cartridge but after the video ends, just got a black screen, hope you can help me
Is your console PAL or NTSC, and what is your BIOS version?
The BIOS version can be seen from the "Region Setup" screen after holding [START + SELECT] on boot up.

aldolimongi
Just Joined
Just Joined
Posts: 2
Joined: May 14th, 2017, 1:56 pm

Re: Stuck at PSIO screen after latest update

Post by aldolimongi » May 15th, 2017, 6:02 am

it´s an NTSC console an the bios is 2.2 A

User avatar
Matt
Cybdyn Systems - Admin
Cybdyn Systems - Admin
Posts: 1342
Joined: December 31st, 2012, 5:37 pm
I am a: Systems Designer
Skype: psio94
Location: Australia
Contact:

Re: Stuck at PSIO screen after latest update

Post by Matt » May 15th, 2017, 2:26 pm

aldolimongi wrote:
May 15th, 2017, 6:02 am
it´s an NTSC console an the bios is 2.2 A
PM sent.

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest